TEMY PLUS P 20 is completely new and redesigned residential cooker with boiler for central heating with possibility to cook or bake in the same time.
It is constructed and produced following the guidelines of the EN 12815.
Boiler chamber is entirely made of steel, while the door frames are made of cast-iron. Cooking plate frame is also made of cast-iron. Oven is made of stainless steel.
The upper door has a „firewindow effect“ (fireproof glass). The lower door has secondary air inlet for better combustion. This model has also a tertiary air inlet for improved combustion efficiency.
Inside construction is also redesigned to allow combustion efficiency above 80% and low emission levels in the same time (extremely low emission levels that are in accordance with most strict European regulations are given in the table below).
The flue opening can be on the upper side or on the back side of the boiler, so the customer can chose which one to use.
Hot-water volume inside the boiler is high – the fact which guarantees functionality of the product as a central heating boiler. It has no insulation coating around, some heat radiation is spreaded toward the ambience directly (around 1 KW). The heat radiation toward the oven is 2 KW and to the cooking plate is 2 KW. The rest is given to the central heating system (15 KW).
TEMY PLUS P has the embedded automatic draught regulator provided. It has altogether 3 air-inlets for improved combustion control: primary, secondary and tertiary air.
Boiler can work only as a stove during the summer time (the grid to be set up on higher position inside the chamber, which is done easily and within a few minutes).
An embedded heat exchanger for thermal safety valve connection is provided.
At the moment this model is available only as „right hand side position of the oven“ as shown in the image.
Overall power 20 KW
Power transmitted to the central heating system 15 KW
Width (mm) 1160
Height (mm) 890
Depth (mm) 705
Necessary draught (Pa) 14
Flow / Return line (inch) 1“
Weight (kg) 310
Flue opening (mm) ø148
Water content 22 lit
Max working pressure 3 bar
Firechamber dimensions 350 x 230 x 405 mm
Flue gas Temperature 212 ºC
Energy Efficiency (wood) 80,56 %
CO (in 13% O2) 0,0929 %
NOx 99,0 mg/m3
TOC (OGC) 17,64 mg/m3
Dust 27,91 mg/m3
Height of the back flue connection axis 730mm, distance from side 235mm
Kasutusjuhend
User manual
DoP
